Sep 09

first image

The logic board bracket holds the trackpad control cable connector and the AirPort/Bluetooth connector securely to the logic board.

Tools used in this guide
  • Phillips #00 Screwdriver

Parts relevant to this guide
  • MacBook Air Logic Board Bracket 
first image

Add NoteAdd NoteStep 1 — Lower Case 

  • Remove the following 10 screws securing the lower case to the Air:
    • Six 2.8 mm Phillips screws.
    • Two 5.4 mm Phillips screws.
    • Two 3.8 mm Phillips screws.

standard image 1
thumb image 1
thumb image 2 standard image 2

Add NoteAdd NoteStep 2

  • Slightly lift the lower case near the vents and push it toward the rear of the computer to free the mounting tabs.

first image

Add NoteAdd NoteStep 3 — Battery 

  • Disconnect the battery connector by pulling it straight away from its socket.

first image

Add NoteAdd NoteStep 4

  • Remove the following nine screws securing the battery to the Air:
    • Four 2.9 mm Phillips.
    • Four 3.8 mm Phillips.
    • One 7.2 mm Phillips.

first image

Add NoteAdd NoteStep 5

  • Lift the battery out of the Air.

first image

Add NoteAdd NoteStep 6 — Logic Board Bracket 

  • Remove the two small Phillips screws securing the logic board bracket to the upper case.

first image

Add NoteAdd NoteStep 7

  • Lift the logic board bracket out of the upper case.

Leave a Reply